How to Upgrade Mac SSD Drive
In this article, we will talk about Upgrade Mac SSD. Upgrading your Mac’s hard drive to an SSD isn’t for the faint of heart, but it’s worth it if you want a smoother, faster, and more reliable way to run your computer. We’ve put together a quick guide on how to go about upgrading your Mac with an SSD. Plus, don’t forget to visit our site that there are other ways in which you can enhance the performance of your software including scanning for Malwarebytes for Mac.
When you’re planning on a Mac hard drive replacement and need to know what exactly you’ll need.
- A new SSD.
- A screwdriver and extra screws (mainly Phillips and Torx, of varying sizes).
- A spudger to maneuver your device’s little nooks and crannies.
- Canned air, a microfiber cloth, and a nice cool glass of water keep your computer dust-free
What is an SSD?
Personal computers offer many components and upgrades, which may be found in Apple computers or PCs. Options include different hard drives or solid-state drives (SSDs). The electronic circuits in SSDs speed data access times and make the drives less prone to mechanical failure, a common problem with HDDs. Modern SSDs come in many types and capacity sizes; an iMac or Macbook user should have no trouble finding the right SSD for the job.
Which Mac hard drives can be replaced?
Apple has changed the design construction of its computers to make it practically impossible to replace their hard drives. Disassembling Apple’s computers like the MacBook Pro became an ambitious and frustrating task almost immediately after new models were released. However, Apple offers (Upgrade Mac SSD) a slim external hard drive that can be connected via a high-speed USB-C port, meaning that if your MacBook Pro is from 2017 onward, you’re in luck as there may still be options to upgrade to an SSD.
How to upgrade the hard drive in MacBook Pro
To upgrade your MacBook Pro to an SSD, you will need specific knowledge of its inner workings. As such, it’s best not to attempt the switch if you aren’t already a hardware expert, or even better: leave it to the experts, otherwise, chances are you’ll end up causing irreparable damage to your machine! The good news is that all MacBook Pros with retina displays are equipped with an SSD by default. Here’s how to upgrade your hard drive on your MacBook Pro:
Read more: What is other storage Mac
Clone your existing hard drive
One of the best ways to make sure you don’t run into any issues while upgrading your hard drive is by taking precautions ahead of time, first, back up your data so that you don’t lose it for good when things go awry. Second, clone your hard drive before upgrading and then switch over to the new one. The process is complex but all in a day’s work for a professional – and no sweat at all for our team here at Drive Store.
Remove the hard drive from your MacBook Pro
Every Mac user should back up their files at least once to avoid losing important information just in case their hard drive fails. But to fit a third-party SSD into the laptop, you may need (Upgrade Mac SSD) to erase the present HDD and then reinstall OS X onto your MacBook’s new HD which will likely void your warranty. Be careful here are some steps to remove the hard drive from a MacBook Pro.
- To remove a hard drive from your Apple MacBook Pro, you will need to flip the laptop over onto a flat surface (which can be anything that can be used as a work area), and gently lift the back panel of your device.
- Make sure not to bend or break any of the internal wires. If your machine is still under warranty, you’ll have to carefully reattach everything after making the changes.
- Most of these are easily accessible via screwdriver, while others may require tool removal. After removing the black strip from your Macbook, go ahead and pull out the old hard drive by pulling on the tab – this should release it from its connection port for easy removal and insertion into another machine if you choose to do so.
- It’s great practice for us techs to handle our machines carefully and follow instructions provided for use by other companies (Upgrade Mac SSD) because this helps prevent damage in general – since repairs cost more than replacements typically.
Read more: Malwarebytes Mac
Install an SSD in your MacBook Pro
Installing an additional SSD in your MacBook Pro can help improve its performance and make it easier to get things done. Before you begin installation though, you must first buy a compatible SSD. You might want to deviate from the Apple-sanctioned SSDs or look for third-party manufacturers that are less expensive. There are several types of devices with different speed capabilities and storage space, so you’ll need to research what type will most suit your situation.
- To install your SSD drive into your MacBook Air, simply put screws on the sides of the drive. Some of these screws can be taken from your old hard drive, but if not you can purchase some more at any computer store.
- The best way to connect and secure a black bar is key for an SSD. Be sure not to twist the cable, and check that it is securely inserted in its slot.
- Here’s a quick diagnostic check to see if your SSD works. Make sure that you put the device on its side before pressing the power button and listen for a few seconds. If your device gives its usual start-up chime, then the installation of your SSD was successful. However, if you hear sounds of broken glass you need to reinstall your old hard drive to test whether or not you have damaged your device (Upgrade Mac SSD).
- Loosen the screws so that the bottom panel comes loose. Set it aside. Then set back in place the bottom cover, and secure it (Upgrade Mac SSD).
Read more: Cal Transit
To keep your MacBook Pro running smoothly long after its SSD upgrade, get Avast Cleanup for Mac. Upgrade to a flash storage life (Upgrade Mac SSD).
How to upgrade the hard drive on your iMac
We’re here to help. Follow these simple steps and you’ll be up and running as new in no time.
Clone your iMac hard drive
First, clone your iMac hard drive to save all your data and avoid being out of sync. You can either use Time Machine and an external hard drive or the Disk Utility app for this task.
Remove the hard drive from your iMac
To remove the hard drive from an Intel iMac follow the steps:
Unscrew the RAM access door and remove it.
- Remove the front cover glass by using heavy-duty suction cups
Remove the screws from the bezel with the TR8 screwdriver.
Loosen the bezel manually, starting from the top and working down to the bottom of the frame.
Disconnect the microphone cable and set the bezel aside.
Disconnect any cables and remove any screws that are keeping the screen connected to the iMac.
- Lift the screen from left to right so you can see the inside of the iMac
Disconnect the thermal sensor by using your fingernails or a spudger to pull out the connector.
Remove the hard drive by pushing down and then lifting up
- Disconnect the other cables
- Remove the parts on the old hard drive
Install an SSD in your iMac
- Place the parts from the old hard drive onto the SSD
- Snap the SSD into place
- Plugin the data, SATA, and power connectors.
- Screw back the screen and bezel.
- Put the front cover glass back on and clean it
How to upgrade your MacBook Air with an SSD
When you want to give your MacBook Air an SSD upgrade, first check which model you have. It’s not possible to just throw a hard drive in the computer, after all. Models made before 2013 are different from models produced afterward, so check (Upgrade Mac SSD) which kind of upgrade your machine needs.
Remove the hard drive from your MacBook Air
- Unscrew the bottom panel.
- Remove the battery if it’s covering the hard drive
- Disconnect all cables from the hard drive
- Remove the hard drive.
- Remove the parts you need to transfer to the SSD: the bracket, shock absorber, and connector.
Install an SSD drive in your MacBook Air
When one wishes to replace a hard drive in a MacBook Air, one needs the same tools and parts to remove the current hard drive as one would need to have to install the SSD. Different models have varying logic board designs, which may affect the space allotted for the SSD. Before starting (Upgrade Mac SSD), you must know your model number so as not to get parts that may be incompatible with your specific machine.
- Check and gently place the SSD to ensure it fits in the space provided
- Screw the SSD into place with the appropriate screws.
- Replace the back cover and screw it in.
- Open your Apple MacBook Air using the Cmd + R keys to start up the Recovery Tools. If all looks good, then you’ve installed a successful replacement part.
How to upgrade your Mac mini hard drive
Replacing or upgrading the Mac mini hard drive is a fairly simple process as long as you have the right tools and are cautious. You just need to take care that you don’t damage any internal components while undoing your machine’s screws, which hold its parts together.
We recommend that when replacing or upgrading your hard drives with newer models, you invest in an external SSD if you have a 2019 or later model, because, unlike older ones, the newer Mac mini machines come with the hard drive fixed in place, making it impossible to remove.
Remove the hard drive from your Mac mini
These instructions are based on the latest model of Mac mini. They’re not applicable if you’re looking to take your older Mac mini apart as the process differs slightly and requires a few more steps.
- With the spudger, detach the three connectors from their posts, turn the computer over and remove the cover of the hard drive.
- Remove the TR-6 screwdriver from the storeroom – it is malfunctioning and needs to (Upgrade Mac SSD) be serviced.
- Remove the screws holding the metal cover in place.
- Carefully lift one end of the top while keeping the other end in place so that the side closest to you rises and reveals another cable. Disconnect this cable as well.
- Gently wiggle the drive out of its socket by removing the screw on the left-hand side.
Install an SSD in your Mac mini
- Install the SSD connector cable
- Attach the connector to its socket in the logic board
- Place the small metal plate on the connector on the logic board
- Secure the plate
- Align the notch in the SSD with the pin in the drive slot
- Slide the SSD into its drive slot
- Screw it in place
- Put the Mac mini back together
SSD vs HDD Speed Capacity and cost
SSDs are beginning to outpace the speed of even the fastest Mac HDDs, because of how SSDs work versus HDDs. SSDs use intricate electrical circuitry, while HDDs have physical moving parts—and it’s no contest between electricity and physical parts in terms of speed. An SSD means shorter wait times when starting up or running apps. It can run demanding resource-intensive programs like photo and video editing and gaming without lagging. An SSD can also multitask without slowing down (Upgrade Mac SSD).